b)
5. Follow the procedure in
After working inside your computer
.
កាត
WLAN
Removing the WLAN card
1. Follow the procedure in
Before working inside your computer
.
2. Remove the:
a)
b)
3. Disconnect the battery cable from the connector on the system board.
4. Remove the single M2.0x3.0 screw that secures the WLAN metal bracket to the computer [1] and lift and remove the metal bracket
off the WLAN card [2].
5. Disconnect the two antenna cables [3] and remove the WLAN card from the M.2 connector on the system board [4].
Installing the WLAN card
1. Insert the WLAN card into the M.2 connector on the system board [1].
2. Connect the two antenna cables to the WLAN card [2].
3. Replace the metal bracket on the WLAN [3].
4. Tighten the M2.0x3.0 screw to secure the WLAN card and bracket to the system board [4].
ការលោះលប្រងង
និងែំលែប្ងលប្រងងលែប្ងែិញ
35
Summary of Contents for Latitude 3300
