Dell EMC Latitude 3300 Service Manual Download

Page: 23 / 105

Accessing Command | Configure From a Linux System

Navigate to the

/opt/Dell/toolkit/bin

directory.

Files And Folders of Command | Configure

The following table displays the files and folders of Command | Configure on a Windows system.

Table 7. Files And Folders configuration

Files/Folders

Description

Command | Configure Command
Prompt

Allows access to the Command | Configure command prompt.

Configuration Wizard

Allows access to the Command | Configure GUI.

Command | Configure WINPE

Allows access to the Windows PE scripts to create a bootable image. For more details, see the Dell
Command | Configure Installation Guide.

Uninstall

Uninstalls Command | Configure.

User’s Guide Online

Provides access to the Command | Configure online documentation.

Launching The Command | Configure GUI

NOTE:

The Command | Configure GUI is supported only on systems running the Windows operating system.

To launch the GUI, click

Start > All Programs > Dell > Command Configure > Configuration Wizard

or double-click the

Dell

Configuration Wizard

on the desktop. The below screen appears:

រលចចាកែិទ្យា

និងសមាសភារ

Summary of Contents for Latitude 3300










































































































Search results

Summary of Contents for Latitude 3300

Reviews:

Related manuals for Latitude 3300

Brands by name

Popular brands

Dell EMC Latitude 3300, Service Manual

Search results

Summary of Contents for Latitude 3300

Reviews:

Related manuals for Latitude 3300

Brands by name

Popular brands