Installing a power supply unit
Prerequisites
1
Follow the safety guidelines listed in safety instructions.
2
For systems that support redundant PSU, ensure that all the PSUs are of the same type and have the same maximum output power.
NOTE:
The maximum output power (shown in watts) is listed on the PSU label.
Step
Insert the power supply module into the power supply cage and push all the way until it clicks into place.
Figure 23. Installing a power supply unit
Next steps
1
Connect the power cable to the PSU, and plug the cable into a power outlet.
2
Follow the procedure listed in After working inside your system.
Expansion cards and expansion card risers
Removing a GPU
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Before working inside your system
.
3
NOTE:
Do not operate the system with any GPU or GPU slot filler removed, as proper air flow and cooling may be impaired,
impacting system performance.
Installing and removing system components
53
Summary of Contents for DSS8440
