D(37-48) |U U U |U U U |U U U |U U U |
C(25-36) |U U U |U U U |U U U |U U U |
B(13-24) |U U U |U U U |U U U |U U U |
A( 1-12) |U U U |U U U |U U U |U U U |
|--------|--------|--------|--------|
-------------- ----------------------------------------------
Legend State Count
------ ------------- -----
. In Use Disks 3
v Available Disks 30
U Unknown Disks 105
------ ------------- -----
Total 138 disks
Note
All newly added disks are in
v
state
Note
You can add two more licences to the storage shelf if you have the required
drives.
5. To add the third shelf capacity license, enter the
license add
command
followed by one license key, separated with a space. For example:
#
license add
xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xx
Added "xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xx" : CAPACITY-ACTIVE feature for 32.7 TiB
capacity DS60
6. To add the fourth shelf capacity license, enter the
license add
command
followed by one license key, separated with a space. For example:
#
license add
xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xx
Added "xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xx" : CAPACITY-ACTIVE feature for 32.7 TiB
capacity DS60
7. Enter the
license show
command to verify the licenses for the storage shelf.
#
license show
Feature : CAPACITY-ACTIVE
-------------------------
## License Key Model Capacity*
-- -------------------------------- ----- ---------
1 xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xx DS60 32.7 TiB
2 xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xx DS60 32.7 TiB
3 xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xx DS60 32.7 TiB
4 xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xx DS60 32.7 TiB
-- -------------------------------- ----- ---------
Licensed Active Tier Capacity: 130.9 TiB*
* Depending on the hardware platform, usable filesystem
capacities may vary.
8. Enter the
storage add tier
activeenclosure
enclosure-id command to add all
four packs on the storage shelf. The following output example displays:
#
storage add tier active enclosure
3
Checking storage requirements...done
Adding enclosure 3:1 to the active tier...Enclosure 3:1 successfully added to the
active tier.
Adding enclosure 3:2 to the active tier...Enclosure 3:2 successfully added to the
active tier.
Adding enclosure 3:3 to the active tier...Enclosure 3:3 successfully added to the
active tier.
Post-Installation Tasks
94
Data Domain DS60 Expansion Shelf
Hardware Guide
Summary of Contents for Data Domain DS60
