manualshive.com logo in svg

Dell EMC Data Domain DS60, Hardware Manual

Share
Download
Dell EMC Data Domain DS60 Hardware Manual Download Page 85

Figure 55 Location of NVRAM and I/O modules (continued)

Note

Slots 2, 3, and 6 (three I/O slots) are used for SAS I/O modules for systems without
Extended Retention (ER).

Note

Slots 2, 3, 6, and 9 (four I/O slots) are for SAS I/O modules for systems with ER or
DD Cloud Tier software.

The table shows the I/O module slot assignments for the DD9500 and DD9800
systems. Each type of I/O module is restricted to certain slots.

The I/O module slot assignments for the DD9500 and DD9800 systems are the same.

Table 16 DD9500 and DD9800 I/O module slot assignments

Slot

Base
configuratio
n

HA

ER or DD Cloud
Tier

DD Cloud Tier
and HA

0

NVRAM

NVRAM

NVRAM

NVRAM

1

Fibre Channel
(FC), Ethernet
or empty

Fibre Channel
(FC), Ethernet
or empty

Fibre Channel (FC),
Ethernet or empty

Fibre Channel (FC),
Ethernet or empty

2

SAS

SAS

SAS

SAS

3

SAS

SAS

SAS

SAS

4

FC, Ethernet or
empty

FC, Ethernet or
empty

FC, Ethernet or
empty

FC, Ethernet or
empty

5

FC, Ethernet or
empty

FC, Ethernet or
empty

FC, Ethernet or
empty

FC, Ethernet or
empty

6

SAS

SAS

SAS

SAS

7

FC, Ethernet or
empty

FC, Ethernet or
empty

FC, Ethernet or
empty

FC, Ethernet or
empty

8

FC, Ethernet or
empty

FC, Ethernet or
empty

FC, Ethernet or
empty

FC, Ethernet or
empty

9

Not available
(contains a
filler)

Not available
(contains a
filler)

SAS

SAS

10

FC, Ethernet or
empty

FC, Ethernet or
empty

FC, Ethernet or
empty

FC, Ethernet or
empty

11

FC, Ethernet or
empty

10 Gb optical
Ethernet for
interconnect
between the
primary and

FC, Ethernet or
empty

10 Gb optical
Ethernet for
interconnect
between the
primary and standby

Data Domain-Specific Installation

I/O module slot assignments

     

85

Summary of Contents for Data Domain DS60





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands