Removing the System Board
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before Working Inside Your Computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
NOTE:
Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup
program after you replace the system board.
NOTE:
Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You
must make the desired changes again after you replace the system board.
NOTE:
Before disconnecting the cables from the system board, note the location of the connectors so that you can
reconnect them correctly after you replace the system board.
Topics:
•
•
Prerequisites
1. Remove the
2. Remove the
.
3. Follow the procedure from step 1 to step 3 in removing the
.
4. Remove the
5. Remove the
.
6. Remove the
.
7. Remove the
8. Remove the
.
9. Remove the
.
10. Remove the
Procedure
1. Disconnect the hard-drive cable from the system board.
2. Peel off the antenna cable from the system board.
31
Removing the System Board
45
Summary of Contents for 5000 Series
