After Working Inside Your Computer
CAUTION:
Leaving stray or loose screws inside your computer may severely damage your computer.
1. Replace all screws and make sure that no stray screws remain inside your computer.
2. Connect any external devices, peripherals, and cables you removed before working on your computer.
3. Replace any media cards, discs, and any other part(s) that you removed before working on your computer.
4. Connect your computer and all attached devices to their electrical outlets.
5. Turn on your computer.
2
After Working Inside Your Computer
9
Summary of Contents for 5000 Series
