Dell EMC 5000 Series, Service Manual

Page: 41 / 56

Removing the Status-Light Board
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After
Working Inside Your Computer . For more safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the base cover .
2. Remove the battery .
3. Follow the procedure from step 1 to step 3 in removing the hard drive .
4. Remove the fan .
5. Remove the keyboard .
6. Remove the base frame .
Procedure
1. Lift the right speaker off and place it on the palm rest.
2. Remove the screw that secures the status-light board to the palm rest.
3. Peel off the status-light board cable from the palm rest.
4. Lift the status-light board, along with the cable, off the palm rest.
a. screw
b. status-light board
27
Removing the Status-Light Board 41