Fitting the Beach Wheels
The beach wheels are attached to the buggy with quick release axles similar to the
standard wheels (but longer). The release button is deeper below the outside of the
hub.
Make sure that the axles are fully pushed down into the hub - they may be quite tight.
ENSURE THAT THE WHEELS ARE SECURE BEFORE USE.
ADJUSTING THE REAR AXLE POSITION OF THE DELTA BUGGY
The new Delta buggy has an adjustable axle position to change the balance of the
buggy making it less or more ‘tippy’. The Delta buggy is designed to be balanced so
that it is easy to manoeuvre. The default axle setting is in the most forward position.
For some occupants whose centre of gravity is further back in the buggy due to body
shape the axle can be moved further back.
To adjust the axle position;
lay the buggy on its side and remove the screws A & B
from both sides of the frame.
There are five possible positions; positions 1, 3 & 5 are shown in the diagrams. Rotate
the axle assembly to line up the holes in the desired position. Replace the screws with
their washers, one side at a time.
The anti-tipper must be adjusted to the
correct position corresponding to the axle (see pg.16).
Pg
.15
ANTI-TIPPER
SETTING 1
SCREW D
SCREW E
AXLE POSITION 1
SCREWS A & B
FIG. 17
