FIG 8.
Lap Pad
Park-Brake Latch
FIG. 7
To engage the park brakes;
pull the brake levers and engage
the red latch into the last notch on
the brake lever housing.
TO TEST THAT THE PARK-
BRAKES ARE WORKING TRY
PUSHING THE BUGGY; THE
REAR WHEELS SHOULD BE
LOCKED
Adjusting the Harness
The harness is attached to two buckles at the back corners of the seat; the length of
the two sides of the lap belt can be adjusted via these buckles. The lap belt is
tightened by using the centre buckle on the lap pad. The lap belt should be used at all
times to keep your child safely in the buggy.
The shoulder straps automatically adjust to the correct height when tightened by
sliding up or down the backrest.
The shoulder straps can be removed if not required by pulling the pad over the buckle
and undoing the Velcro® fastening. The bottom part of the shoulder strap can be
tucked out of the way under the seat.
The straps can be secured out of the way when transferring someone into and out of
the seat by using the Velcro® on the ends of the straps and under the lap pad buckle
to attach them to the side pads and the Velcro® patch on the right hand side of the
cover (see fig. 14).
The groin strap is
positioned by passing one
end of the lap belt through
the webbing loop on the
front of the pad before
fastening the lap belt. The
groin strap is attached to
the seat canvas the strap
passing through the
required loop on the canvas
and securing with the buckle
(see Figs 8 & 13).
Pg
.9
