2.1 Connecting the camera to a network
with Wi-Fi
1.
Connect the power adaptor cable (
"2"
) to
the “Y” cable (
"3"
).
2.
Connect the network cable (
"4"
) and the
router.
3.
Plug the power adaptor connected to the
camera into the power socket.
4.
Open the camera settings and connect
the camera to the Wi-Fi network.
5.
Disconnect the network cable from the
camera.
6.
Detach the "Y" cable (
"3"
) from the cam-
era.
7.
Plug in the power adaptor cable to the
camera.
8.
Fasten the antenna on to the camera.
9.
Fasten the camera in a suitable position
with the included screws in the camera
foot.
10.
Plug in the power adaptor to the power
socket.
2.2 Connecting the camera to a network
using Ethernet cable without PoE
This procedure describes how to connect the
camera when Wi-Fi connection is bad and there
is no possibility to use PoE function.
1.
Connect the power adaptor cable to the
“Y” cable (
"3"
).
2.
Connect the network cable (
"4"
) and the
router.
3.
Plug in the power adaptor connected to
the camera into the power socket.
4.
Open DeLaval FMC-IP software, applica-
tion or web service to configure the cam-
era.
289953
Fig. 7: Connecting the power adapter cable.
243501
Fig. 8: Camera with antenna and power cable.
289953
Fig. 9: Connecting the power adapter cable.
DeLaval farm monitoring camera FMC-IP1.1
Installation
© DeLaval 2021.
2021-12-07
21 (88)
