S
YSTEM
I
NSTALLATION
Dekolink™—IDEN Repeater Hardware Manual
13
6.
S
YSTEM
I
NSTALLATION
System installation includes the following steps:
Safety Instructions
Software Installation
Hardware Equipment Installation
System Initialization
System Activation
6.1. Safety Instructions
Note: Before starting the installation, read the following.
Follow all local safety regulations when installing the repeater.
Only qualified personnel are authorized to install and maintain the repeater.
When operating the repeater, it is recommended to keep its cover closed while
the power is on. Some maintenance tasks may require the repeater door to be
opened while the power is on. In such cases, perform the required tasks
carefully and remember to close the repeater cover/door when finished
Use a suitable mounting surface, such as a rigid wall.
Follow Electro-Static Discharge (ESD) precautions.
Before closing the repeater cover, make sure no wires are in the way.
Install the repeater close to the service area to improve the output power and
noise figure.
Use low loss cables to connect antennas to the repeater.
Install the repeater in a shielded, ventilated, and easy-to-reach area.
