Product-Notes Manual
Article No.: 843053
Deko-Light Elektronik-Vertriebs GmbH
29.03.2021
www.deko-light.com / [email protected]
Technical Data can be changed without advance notice. Errors excepted.
4 / 22
3. Care
Repairs may only be carried out by a qualified electrician.
Disconnect the entire product from the mains first and allow it to cool down before cleaning or maintaining.
Use a dry or slightly moistened cloth for cleaning.
Never use any chemicals, flammable cleaning agents or abrasives. These may cause damage to the surface
coating and/or the insulators.
4.
Faulty Function / Reset
● Are the lights to be controlled ready for operation / correctly connected and supplied with power?
● Check the connected lines.
●
Is the correct voltage connected to the controller?
● Check the polarity (+/-) of all connections.
● Check the connections of the connected lines.
● Are the lights to be controlled ready for operation and correctly connected?
● Can the connected lights be switched on / off using button 1?
● In the event of general malfunctions, carry out a reset by disconnecting the controller from the mains for at
least 30 seconds.
For better function and error analysis, there are colored LEDs in the controller that give you information about
the operating status or any pending errors. The LEDs are visible when you look through the small opening on
the front of the housing.
LED-Colour
Display Type
Status-Information
Grün
constantly
supply voltage OK
BT-Network OK
no connection to other BT-components
Blau
constantly
supply voltage OK
BT-Network OK
connected to other BT-components
Blau
flashing
Fault,
system needs to be restarted
Rot
constantly
Module overheated
(check installation location and allow to cool)
Rot
flashing
Module overloaded
(reduce power and restart module)
5. Storage and Disposal
Used electronic devices must be brought back to public collection points and must not be disposed of as
household waste.
Storage in a dry and clean environment. Do not strain the product mechanically during storage.
