Product-Notes Manual
Article No.: 843053
Deko-Light Elektronik-Vertriebs GmbH
29.03.2021
www.deko-light.com / [email protected]
Technical Data can be changed without advance notice. Errors excepted.
11 / 22
6.
Change the mode settings of the controller manually
The controller is delivered pre-programmed in 1-channel / single mode. Depending on the type of luminaire
you want to connect, you need the mode required (1-channel mode / single, 2-channel mode / WW-CW / HCL,
3-channel mode / RGB or 4-channel mode / RGBW) accordingly.
You have the option of setting this via the APP (see page 17) or changing it manually, as listed below.
The desired mode is set by holding down a button that may already be connected as shown in the drawing.
Alternatively, you also have the option of setting the desired mode using a wire bridge between the respective
connection terminals.
Mode selection:
Hold down button 1 or jumper (C + 1) for 60 seconds = 1-channel mode / single
(delivery condition) (see page 6)
Hold down button 2 or jumper (C + 2) for 60 seconds = 2-channel mode / WW-CW / HCL (see page 7)
Hold down button 3 or jumper (C + 3) for 60 seconds = 3-channel mode / RGB (see page 8)
Hold down button 4 or jumper (C + 4) for 60 seconds = 4-channel mode / RGBW (see page 9)