background image

35 

30SD, 36SD, 45SD 

 

Rev. Nov2014 

To order replacement parts, visit our web-site at www.serviceandwarrantyonline.com  
Or dial Toll Free 1-800-393-0668 Monday-Friday 8AM-5PM 
OEM Replacement Parts 

Engine Parts 

GXi Part Number 

Description 

E10211 

Fuel Primer Bulb Kit: Includes primer bulb assembly, fuel line, and 2 clamps. Models: 30SB, 
30SD, 36SB, 36SD, 45SB, 45SD 

B01712 

Fuel Tank with gas cap, fuel valve, fuel line, and clamps for 420cc Snow Blower Engine.  
Models: 36SB, 36SD, 45SB, 45SD 

B09611 

Oil Fill Plug and Gasket for 420cc & 302cc Snow blower Engine.  Models: 30SB, 30SD, 36SB, 
36SD, 45SB, 45SD 

 E11512 

Engine Assembly - 302cc Electric Start (Includes complete ready to run engine assembly with 
fuel tank and recoil. Does NOT include crankshaft pulleys.)  Models: 30SD, 30SB 

E07612 

Engine Assembly - 420cc Electric Start (Includes complete ready to run engine assembly with 
fuel tank and recoil. Does NOT include crankshaft pulleys.)  Models: 36SB, 36SD, 45SB, 45SD 

E10811 

Engine Recoil Assembly for 302cc Snow blower Engine. Models: 30SD, 30SB 

E07910 

Engine Recoil Assembly for 420cc Snow blower Engine. Models: 36SB, 36SD, 45SB, 45SD 

E11311 

Carburetor Assembly for 302cc Snow blower Engine. Models: 30SD, 30SB 

E08010 

Carburetor Assembly for 420cc Snow blower Engine. Models: 36SB, 36SD, 45SB, 45SD 

E08110 

Snow blower Safety Key  Models: 30SB, 30SD, 36SB, 36SD, 45SB, 45SD 

E08210 

Fuel Tank Lid.  Models: 30SB, 30SD, 36SB, 36SD, 45SB, 45SD 

E09211 

Snow blower fuel tank screen. Models:  30SB, 30SD, 36SB, 36SD, 45SB, 45SD 

E10411 

Muffler Cover for 302cc Snow blower Engine.  Models: 30SD, 30SB 

E10311 

Engine Cover for 302cc Snow blower Engine.  Models: 30SD, 30SB 

E09311 

Engine Cover for 420cc Snow blower Engine.  Models: 36SB, 36SD, 45SB, 45SD 

E09411 

Muffler Cover for 420cc Snow blower Engine.  Models: 36SB, 36SD, 45SB, 45SD 

E09511 

Muffler Assembly for 420cc Snow blower Engine. Includes muffler and elbow and air check 
valve.  Models: 36SB, 36SD, 45SB, 45SD 

E09612 

Oil Fill and Drain Assembly. Includes oil fill neck, dipstick, drain tube and drain bolt. For 420cc 
& 302cc Snow blower Engine. Models: 30SB, 30SD, 36SB, 36SD, 45SB, 45SD 

E10611 

120V Electric Start Assembly for 302cc Snow blower Engines.  Models: 30SD, 30SB 

E09711 

120V Electric Start Assembly for 420cc Snow blower Engines.  Models: 36SB, 36SD, 45SB, 
45SD 

E09811 

EPA Approved Fuel line - Preformed for 420cc snow blower engine. Includes hose clamps.  
Models: 36SB, 36SD, 45SB, 45SD 

E09911 

Snow blower engine on/off switch. Includes safety key.  Models: 30SB, 30SD, 36SB, 36SD, 
45SB, 45SD 

E10012 

Plastic choke knob for 420cc & 302cc Snow blower engines.  Models: 30SB, 30SD, 36SB, 
36SD, 45SB, 45SD 

Summary of Contents for 30SD










































Reviews: