Page
9
of
32
For more information contact us: 970.493.1901 or
Document #7650-0005 Rev D1. © Copyright 2018 Directed Energy, Inc. All rights reserved.
Rear Panel Features
Current Output
A socket that accepts the factory-supplied output cable, and is the connection for the
system generated current pulses. DO NOT TOUCH any part of this cable while the
PCX-7401 is powered up. Please review the Safety section.
Note:
Absence of a properly installed output cable disables the output and creates
an output enable fault.
Sync Output
Synchronization pulses for external devices are available at this BNC connector. The
sync pulse corresponds to the leading edge of the output current pulse.
Rear Enable
This connector accepts either an external dry-contact closure or the factory-supplied
shorting BNC plug. Closed contacts or use of the shorting plug enables the output.
Open contacts or removal of the shorting plug disables the output and creates a rear
enable fault.
USB Connector
Use this connector to communicate with an external computer with a USB cable.
Power Switch
Current Output
Sync, Rear Enable, External Trigger
USB
Ethernet
RS232
AC Power Connector
