6
DEHOUST GMBH – GUTENBERGSTR. 5-7 – D-69181 LEIMEN – www.dehoust.com
3.4.
Structu
re
Figure 2: Structure of the
break tank system
: front side
3.5.
Intended use
The
break tank system
may only be used in usage areas that are described in this manual. Unintended use of the
break tank
system
can result in danger to persons, systems in the surrounding area and the environment.
Do not operate the
break tank system
unless it is in proper condition technically.
Do not operate the
break tank system
in partially assembled condition.
The
break tank system
can only pump the medium described in the documentation of the relevant version.
Never operate the
break tank system
without pumping medium.
The minimum volumetric flow cannot exceed 2 l/min (0.12 m³). A lower volumetric flow of the consumers will result in
unusually frequent switching on and off of the immersion pump. In this case an appropriately dimensioned expansion vessel
must additionally be placed in the pressure line.
Do not restrict the
break tank system
on the input side (avoiding cavitation damage).
Agree on alternative operating modes with the manufacturer, if not stated in the documentation.
Storage tank 570 L
Aquaform AQF
Immersion pressure pump with
integrated automatic switch
Overflow DN 70
Rectangular overflow
according to EN 1717
Drinking water connection
¾“
Process water connection 1“
