6
4. Intended use | 5. Specifications
Dehaco B.V. • Kruisbaak 25 • 2165 AJ Lisserbroek (NL) •
✆
+31 (0)252 - 41 79 50 •
[email protected] • www.dehaco.nl
4. INTENDED USE
The DTS170 Floor stripper is intended for:
- easy removal of carpet tiles, carpet and glue
residues,
- use with an accompanying hard steel blade,
- use on hardened floors indoors
- use by one person who is capable of doing this
type of work.
WARNING!
Any other use than described above shall exclude
Dehaco from any responsibility!
Use for other purposes has not (yet) been investigated.
For any other possible applications, please contact
your supplier IN ADVANCE to consult whether the
machine is suitable for such purpose.
WARNING!
The DTS170 Floor stripper does NOT comply with the
ATEX Directive and should therefore NOT be used on
locations with an increased fire/explosion hazard!
5. SPECIFICATIONS
5.1 General
Weight:
170 kg
Supply voltage:
230V / 50 Hz
(check the type plate!)
Plug:
CEE 3-pole, 16A
Frequency:
50 Hz
Strip blade motor: 1.1 kW
Drive motor:
0.55 kW
IP class:
IP 54
Blade width:
35 cm
5.2 Wear parts
SWear parts are components in the machine that
do not fall under the warranty conditions, due to
additional contact with the product.
The wear parts of this machine include:
-
The strip blade.
-
The clamping plate.
-
The blade holder.
5.3 Noise emission
The noise level in the direct vicinity of the DTS170
at a test setup is approx. 78 dB. Due to additional
amplification depending on the subfloor and the
room in which the work is performed, wearing hearing
protection is expressly recommended. This is to
prevent hearing damage when used for a long period
of time!
Ear muffs are provided in the accessories case! USE
THEM!
5.4 Vibration hand arm system
The measured value of the vibrations: 1,7 m/s
2
.
The deviation on this measurement is: 0.5 m/s
2
.
Usage time per day:
Limit value 2.5m/s
2
8 hours
Limit value 5.0 m/s
2
8 hours
These are values measured with a new machine and
depend on factors such as accessories, maintenance,
the surface to be treated and ambient temperature.
Measures in case of values above 2.5 m/s
2
:
-
Switch off the vibration motor when reversing.
-
Use anti-vibration work gloves
-
Take breaks, switch between jobs
-
Ensure warm hands
-
Keep the blade sharp!
-
Ensure proper maintenance
-
Periodically replace the vibration rubbers.
