11
© 2020 Dehaco B.V. • User Manual • Floor stripper DTS 170 EU (230V)_2020-04_v2.2_EN
10. Malfunctions
10.3 Stripper does not function properly
-
Is the blade sufficiently sharp?
-
Has the driving speed been adjusted to the
blade load?
-
Check the power cord, does the led in the reset
button light up?
-
Is the blade still properly fastened in the blade
holder?
-
Has a vibration rubber been torn?
- Is there a defective bearing (house)?
10.4 Error code in the frequency
controller
The DTS170 stripper has been provided with a
Bonfiglioli S2U frequency controller.
In case of a frequency controller error, a code is shown
in the display. These codes can be seen in the next two
pages and have been taken from the English WEG CFW
manual:
