7
© 2020 Dehaco B.V. • User Manual • Floor stripper DTS 170 EU (230V)_2020-04_v2.2_EN
6. Safety
6. SAFETY
WARNING!
Almost all accidents are the result of:
lower concentration, negligence, inattentiveness
or incorrect assessments! Work steadily and stay
concentrated: You have been warned!
Always ensure sufficient lighting of the workplace,
if necessary place additional (building) lighting to
maintain sufficient overview.
All persons involved with assembly, commissioning,
operation, maintenance and repair must:
§
Have the level of know-how and
qualifications required for their task.
§
Have read and understood this user
manual.
§
Observe all indicated safety instructions.
§
Have sufficient, suitable and good quality
tools at their disposal, if necessary.
WARNING!
There is an immediate hazard of physical injury,
damage to machines and the environment in case of
inexperienced and inexpert use: Keep bystanders at
a safe distance from the work !
-
Keep children and other persons at a distance
when using the machine. If you are distracted,
you could lose control of the tool.
-
Stay alert, know what you are doing and use
common sense when using the machine. Do
not work with machines when you are tired
or under the influence of drugs, alcohol or
medication. A moment of inattentiveness when
using the tool could lead to serious injuries and
damage to the machine and the surrounding
area.
-
Remove all loose tools before switching on the
machine.
-
Prevent an unbalanced body posture. Make
sure you are standing firmly and always
maintain your balance. In this way you are
better able to control the machine during
unexpected situations.
Carefully read the user manual prior to
starting the machine!
-
Wear suitable clothes. Do not wear loose-
hanging clothes or jewellery. Keep hairs,
clothes and gloves away from moving parts.
Loose-hanging clothes, long hair and jewellery
could be taken along by moving parts.
-
Switch off the machine and disconnect the
power cord when adjusting the machine,
exchanging accessories or finishing the work.
This precaution will prevent the machine from
being started unintentionally.
-
Repair damaged parts prior to use or have
them repaired. Many accidents are caused by
poor maintenance.
-
Keep cutting tool inserts sharp and clean.
Carefully maintained cutting tool inserts with
sharp cutting edges are less prone to getting
stuck and are easier to guide.
-
In addition to the above-mentioned rules,
you should also familiarise yourself with local
working conditions and health and safety
rules.
CAUTION:
Structural preventive maintenance reduces the risk
of malfunctions during work!
WARNING!
Use personal protective equipment as obliged
nationally, locally and/or at the building site, but at
least use the following: safety helmet,
hearing protection, safety goggles, gloves, safety
shoes.