DEHACO B.V.
Kruisbaak 25, 2165 AJ Lisserbroek (NL)
Postbus 189, 2160 AD Lisse (NL)
Tel.:+31(0)252 417 950, fax: 418 531
User Manual
Floorstripper DTS-100 v1.0
-
October 2011
-blz
8
-
Safety on the working environment
a) Keep your working area clean and well lit. Messy, cluttered or dark
working areas invite accidents.
b)
Don’t work with this machine in explosive atmospheres, like flammable
liquids, flammable gasses or combustible dust. Power tools create
sparks which can ignite the fumes or dust.
c) Keep children and bystanders away while operating the machine. When
you get distracted it might cause you to lose control of the tool.
d) Stay alert, watch what you are doing and use your sense when using
the machine. Do not operate the machine while under the influence of
drugs, alcohol or medication. One moment of inattention may result in
serious injuries and damage to you and your surroundings.
e) Wear personal protective equipment. Always wear safety glasses,
safety shoes, gloves, ear protection and dust masks. Wearing personal
protective equipment reduces the risk of injuries.
f) Remove all loose tools before turning on the machine.
g) Avoid an unbalanced body position. Be sure you stand properly and
balanced at all times. This allows you to keep the machine under control
in unexpected situations.
h) Wear suitable clothing. Do not wear loose clothing or jewellery. Keep
your hear, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be pulled into moving parts.
i) Stop the machine and disconnect the power before setting the machine,
changing accessories or when you finished working.
This precaution prevents unintentional starting of the machine.
j) Have damaged parts be repaired before use. Many accidents are
caused by poor maintenance.
k) Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
l) Consider (besides the above mentioned rules) the local conditions and
regulations as well!
