DEHACO DTS-100, User Manual

Page: 13 / 19

DEHACO B.V.
Kruisbaak 25, 2165 AJ Lisserbroek (NL)
Postbus 189, 2160 AD Lisse (NL)
Tel.:+31(0)252 417 950, fax: 418 531
www.dehaco.nl
info@dehaco.nl
User Manual
Floorstripper DTS-100 v1.0
-
October 2011
-blz
13
-
10. Failures
This chapter provides general guidelines for troubleshooting the machine,
not a step-by-step search diagram.
The Dehaco floor stripper is solid built and will operate trouble-free for a
long time when used within the implicated standards.
WARNING!
Let electrical defaults be repaired only by a qualified person using
only original spare parts. This will ensure that the safety of the
machines is maintained!
1) Driving does not function (properly)

Has the power cable from the drawbar been properly connected?
 Check the power supply, is the lamp in the reset button burning?

Check the cable from the drawbar for damage.

Check if the motor is working.
ATTENTION!! Procedure resetting machine:
Unplug the power cable from the floor stripper
Wait 30 seconds (= reset speed control)
Plug the power cable back into the socket
Restart the floor stripper according to CHAPTER 8
2) Stripper does not work (properly)

Has the speed been adjusted according to the load on the blade?

Check the power supply, is the lamp in the reset button burning?
 Is the blade sharp enough?

Is the blade still firmly mounted into the blade holder?

Are the rubber shocks ripped?

Is there a failure with the bearing(housing)?