DEHACO B.V.
Kruisbaak 25, 2165 AJ Lisserbroek (NL)
Postbus 189, 2160 AD Lisse (NL)
Tel.:+31(0)252 417 950, fax: 418 531
User Manual
Floorstripper DTS-100 v1.0
-
October 2011
-blz
10
-
8. Bediening
ATTENTION!!
Check the power cable for damage before connection!
ATTENTION!!
The floor stripper is to move by hand by tilting back the machine so that it
rests on the transport wheels.
ATTENTION!!
The tempered steel blades are very sharp!
Be careful with mounting and removing the blade!
Make sure that the drawbar and the drawbar cable plug are tight
Mount the ballast weight plates and fix them. Use the supplied 6
and 8 mm Allen Keys.
Mount a blade into the blade holder and tighten the base plate
holder with the 6 mm Allen Key. If a nut gets loosened at the back:
use the supplied spanner 13.
Plug the power cable into the socket on the stripper.
THE FLOOR STRIPPER IS NOW READY TO BE USED!
