Assembly Instruction
DEGERtraker
Part III
– Structure
Assembly base frame
Assembly Instruction DEGER
traker
3000NT / 3000HD / 5000NT / 5000HD / 6000NT / 7000NT / 9000NT
2012-07-01
Page III-5
2nd step:
Built in bolt M24x180 with washer M24 and self-looking nut M24.
Do not screw the bolts with the nut too
tightly, to ensure that the shackles at the rotating head are not pressed together.
Detail:
ATTENTION!
Slide bearing bushings are installed at the rotation point of the base frame
– these must be slightly
lubricated in the initial installation. Later on lubrication is possible at any time through a lubricating nipple
in the bolt M24x180. A list of suitable lubricants you find on page VII-3.
Mounting the modules on the base frame beforehand is not permitted!!
