-26-
143351 - 69/7200 Series (12-May-2017)
1
141504 - 90° Elbow, 3/4 JIC-m x ORB (10 or 12)
9
141616 - 45° Elbow, 3/4 JIC-m x ORB (2)
4
16
24
141574 - Relief Valve
(1)
141581 - Quick Coupler-m, 3/4 ORB (6 or 8)
141577 - Dust Cap, Coupler-m
(6 or 8)
20
141573 - Flush Face Coupler, 3/4 ORB (1)
126597 - Hose, 1/2 x 52 (3)
126513 - Hose, 1/2 x 264 (2)
52
264
311
126610 - Hose, 1/2 x 311 (2 or 4)
REAR HOSE ROUTING
IMPORTANT
Connect to hydraulic tank drain.
(sample image only: actual tractor
location and arrangement may differ)
*ALTERNATE DRAIN
Models
without
a
motor seal drain
kit
(SR:
BRE10112 or
DR & HC:
BRE10113
)
require a drain line
routed to the hydraulic tank.
Remove existing plug, install nipple
and attach hose (140) routed from
rear relief valve.
Remove existing tractor plug
Install new nipple (141677)
126599 - Hose, 1/2 x 140 (1)
Requires:
141677 - Nipple, 3/4 JIC-m x M18M STR (1)
TILT, LIFT & HQT
SYSTEMS ONLY
Connect direct
to rear hydraulic
connections.
ANGLE SYSTEM ONLY
MUST connect to rear relief valve
system/tank drain and then to rear
hydraulic connections - see detail.
1
4 16
264
264
Refer to Front Hydraulic
Connection Details
75
311
9
9
311
311
311
311
311
311
311
311
311
IMPORTANT
311
264
311
264
1
24
140
Alternate drain,
some models only
(see below)
MUST be used on Angle Hydraulic System
RELIEF VALVE CONNECTION DETAIL
20
1
4 16
1
9
1
1
Connects to
hydraulic
tank drain.
52
52
52
264
264
MUST connect
to rear tractor
hydraulic connections.
24
MUST be zero pressure
in return line.
IMPORTANT
IMPORTANT
140
Alternate drain, some
models only (see below)
Hydraulic Routing
Note: 7200 Models require
extra hoses for Tilt System.
Run hoses down one side
then cross over at the joint.
IMPORTANT:
Secure the hoses
so they do not
rub the driveline
or wear on any
other surfaces.
Ensure there is enough
slack for turning.
