manualshive.com logo in svg

Degelman 5900 Series, Operator'S Manual/Parts Catalog

Share
Download
Degelman 5900 Series Operator'S Manual/Parts Catalog Download Page 18

-14-

142664 - 5900 Series   (24-November-2020)

116210 - Cutting Edge, 5/8 x 10’ (1)

116206 - Cutting Edge, 5/8 x 6’ (2)

116207 - Cutting Edge, 5/8 x 7’ (2) - (shown)

118204 - Scraper Bolt, 5/8 x 2-1/4 UNC GR5 (ar)

118447 - Lock Nut, 5/8 UNC GRC - Unitorque (ar)

118448 - Lock Nut, 3/4 

GRC - Unitorque (6)

806014 - Skid Shoe (2)

118901 - Lynch Pin, 1-1/2 (2)

115402 - Pin, 4-1/8 (2)

5900 Blade Assembly

781302 - 14 ft (shown)

781301 - 12 ft 

781300 - 10 ft 

117145 - Wear 

Bushing (2)

117145 - Wear Bushing (2)

781336 - Pin, Angle Cylinder (2)

781328 - Tilt Bell (1)

781326 - Tilt Ring (2)

118011 - Bolt, 1/2 x 1-1/2 (2)

118051 - Bolt, 3/4 x 3 GR8 (6)

118587 - Flat Washer, 1/2 (2)

118504 - Lock Washer, 1/2 (2)

118447 - Lock Nut, 

5/8 GR5 (2)

781370 - Relief Valve 

Bracket (2)

141524 - Relief Valve (1)

781340 - Pivot Pin, 

Blade/Pivot (1)

118538 - Flat Washer, 

5/16 (2)

118530 - Lock Washer, 

5/16 (2)

118427 - Lock Nut, 

5/16 (2)

118795 - Bolt, 5/8 x 

2-1/4 GR8 (2)

118105 - Bolt, 5/16  

x 2-1/2 (2)

5900 Pivot Pin - Relief Valve Detail

BLADE ASSEMBLY

5900 Blade Components

5900 BLADE AND PIVOT ASSEMBLY

Summary of Contents for 5900 Series




























Reviews:

No comments

Brands by name

Popular brands

Load more brands