Page 5
Ensure that packing material is
disposed of in a responsible
manner and that any plastic bags
are cut up to prevent children
playing with them and
accidentally suffocating.
Operation
2
x
Do not fill the kettle when it is
fitted on its base.
x
Ensure that the appliance is
switched off before removing it
from its base.
x
Do not stick any foreign ob-
jects on the appliance.
x
The kettle will switch off
automatically when the water
has boiled. If you want to stop
the heating process before the
kettle automatically switches
off, press the on/off switch
handle up or lift the main body
by holding the handle of the
kettle.
x
After the kettle has switched
off automatically (or has been
switched off manually) it may
need time to cool down. After
15-20secs, the kettle can be
switched on again.
x
If the kettle ever boils dry, the
power indicator will go out. Lift
the on/off switch and unplug.
Allow 15 minutes to cool
before refilling with cold water.
The safety cut-out will
automatically reset during this
time.
x
Do not remove the kettle from
its base during operation.
x
Before cleaning the kettle
disconnect from the power
supply and wait until it was
cooled down.
x
Only use the cord supplied
with this kettle. If a
replacement is required, only
approved components may be
used.
Read safety and set-up
instructions thoroughly prior to
using this appliance!
Preparation
1
Remove all packaging and sticker
materials and dispose of them according to
the applicable legal regulations. Consult your
local authorities for disposal information and
facilities available.
2
Before using the appliance for the first
time, clean all parts which come into contact
with water carefully. (See the “Cleaning and
care” section).
3
Clean kettle well before initial use and
discard water of first two boiling cycles.
Operation
Remove the jug kettle from the base before
filling.
To fill the jug kettle, open the cover by
pressing the lid button downwards, then fill to
the desired level (min0.5L-Max.1.7L), close
the lid by pressing it down until it clicks into
place.
Plug the power supply cord into the wall
socket, press the On/Off switch down, the
power indicator lights up.
When the water has boiled the kettle will
automatically switch itself off. Stop the
boiling process at any time by lifting the On/
Off switch. The power indicator will go out.
Note: Do not open the lid when steam is
coming out of the spout. The kettle is only to
be used with the base provided.