PRO-TC-MAN-17V01 (0802)
Copyright © 2017 Define Instruments
9
4.2 - Installation instructions
A
Prepare the
Panel Cutout
to
92 x 45mm ±.5 (3.62 x 1.77" ±.02),
as shown below.
Allow at least 155mm (6.10")
depth behind the panel to accom-
modate the meter body, protrud-
ing connectors and cabling.
B
Remove the
Mounting Clips
from
the meter back.
C
Slide the
Panel Gasket
over the
rear of the unit to the back of the
Meter Faceplate
.
D
From the front of the panel, insert
the meter into the P
anel Cutout
.
Holding the unit in place, engage
the
Mounting Clips
so that the tabs
snap into place over the notches on
the case.
E
To achieve a proper seal, tighten
the
Screws
evenly until the unit sits
firmly against the panel. Do not
over-tighten the screws.
Panel
Meter Faceplate
Panel
Gasket
Mounting
Clips
Screws
92mm
±.5
(3.62″
±.02
)
45mm
±.5
(1.77″
±.02
)
Panel Cutout
