PRO-TC-MAN-17V01 (0802)
Copyright © 2017 Define Instruments
22
H _ _ _ HYSTERESIS VALUE
scrolls across the display and toggles with the hyster-
esis value for the selected setpoint. Use the
and
buttons to adjust this
value if required, and then press
.
The
HYSTERESIS VALUE
defines the separation band between setpoint activation and deacti-
vation, and will operate as per the
SP TYPE
setting selected in 7.2G.
I
_ _ _ MAKE DELAY
scrolls across the display and toggles with the current make
delay time for the selected setpoint. This is the time delay between setpoint ac-
tivation, and when the relay turns on. Adjust this value in 0.1 second increments
using the
and
buttons, and then press
.
J
_ _ _ USER ACCESS?
scrolls across the display and toggles with the direct access
permission setting for the selected setpoint. Use the
and
to select either
OFF
or
ON
, and then press
.
When enabled, this option allows the selected setpoint's value to be edited directly after press-
ing the
button, without needing to enter a PIN number or go through all of the other op-
tions. Each setpoint can individually have this option enabled or disabled. See Section 8.
K _ _ _ EDIT SETPOINT
scrolls across the display and toggles with
SKIP
. You are
now back at 7.2A. To edit another setpoint, follow the instructions from 7.2A
–
K
again. If you do not wish to edit another setpoint, press
now to skip to 7.3.
7.3 - Edit F2 PIN number
A _ _ _ EDIT F2 PIN NUMBER
scrolls across the display and toggles with
SKIP
.
Press
to skip and return to the operational display, or the
button and
then
to
ENTER
and change your PIN number.
B _ _ _ ENTER NEW F2 PIN NUMBER
scrolls across the display and toggles with
the current PIN (default 1). Using the
and
buttons, enter your new F2 PIN
number. Then press
to exit to the operational display.
