PRO-TC-MAN-17V01 (0802)
Copyright © 2017 Define Instruments
20
7
SETPOINT SETUP
Your controller will allow configuration of up to 6 setpoints, however full
functionality is only supported when relay output hardware is installed.
(Setpoints with no corresponding relay output hardware may be used as simple LED
indicators, if desired. In this case, features requiring relay output functionality will
continue to appear in the setup menu, but will be ignored by the controller.)
7.1 - Enter F2 PIN number
A
Enter setpoint setup mode by pressing and holding the
button for 3 seconds.
_ _ _ ENTER F2 PIN NUMBER
scrolls across the display and toggles with
0
. Use
the
and
buttons to enter your security code (factory default 1). Then
press
. If the correct PIN is entered, setup is started at 7.2.
If an incorrect PIN number is entered,
_ _ _ INCORRECT PIN – ACCESS DENIED
scrolls across the display and it returns to normal operating mode.
You will have the opportunity to change your PIN number at the end of this section
(7.3). If you have forgotten your PIN number, see Section 9.
7.2 - Setpoint setup
A _ _ _ EDIT SETPOINT
scrolls across the display and toggles with
SKIP
. Press
now to skip to 7.3, or use the
and
buttons to select a setpoint to edit,
and then press
.
B _ _ _ SP VALUE
scrolls across the display and toggles with the current value for
the selected setpoint. Using the
and
buttons, adjust the display value at
which the selected setpoint will activate, and then press
.
