PRO-CTR-MAN-16V03 (0128)
Copyright © 2016 Defi ne Instruments
29
J
_ _ _ BREAK DELAY
scrolls across the display, and the current break delay value
for the selected setpoint appears. This is the time delay between setpoint de-
activation, and when the relay turns off . Adjust this value in 0.1 second incre-
ments using the
and
buttons, and then press
.
Please skip to 9.2L now.
K
_ _ _ ON TIME
scrolls across the display, and the current selection appears. This
defi nes the time that a 'Timed' relay (see 9.2F) remains energised. Adjust this
value in 0.1 second increments using the
and
buttons, and then press
.
L
_ _ _ STARTUP INHIBIT
scrolls across the display, and the current selection
appears. Use the
and
buttons to
select
NO
or
YES
. Then press
.
This option can be used with setpoints which may
be active initially at power up. Setting
STARTUP
INHIBIT
to
YES
will cause a relay to remain off (de-
energised) at power up until it has fi rst reached its
inactive state. It will then function normally.
(Energised below)
Startup
inhibit
POWER UP
TIME
M _ _ _ RESET ACTION
scrolls across the display, and the current selection ap-
pears. This parameter specifi es the action to be executed when the 'Reset Edge'
(9.2O) occurs. Use the
and
buttons to select:
NONE
,
RS PRM
(reset pri-
mary counter),
RST B
(reset B counter),
RST C
(reset C counter),
RST BT
(reset
batch),
RSTBTC
(reset batch count) or
UNLTCH
(unlatch all setpoints). Then
press
to accept.
If you selected
NONE
, then the step that you proceed to now will depend
on which setpoint you are editing (your selection in 9.2A):
SP 1
= Skip to 9.2O now.
SP2–4
= Skip to 9.2Q now.
If you selected
RS PRM
,
RST B
,
RST C
or
RSTBTC
, continue to 9.2N now.
If you selected
RST BT
or
UNLTCH
, skip to 9.2O now.
See 7.1 for more information on the batching feature.
N
_ _ _ RESET VALUE
scrolls across the display, and the current reset value ap-
pears. Use the
and
buttons to adjust the value which will be loaded
into the destination register selected in 'Reset Action' (9.2M) when the selected
'Reset Edge' (9.2O) occurs. Then press
to accept.
