6
Installation (continued)
4
Installing the mounting plate
NOTE:
The center mounting plate (D) hole is for the
mounting bolt (DD). The other two holes in the mounting
plate (D) are for routing the house wiring.
NOTE:
Ensure the “UP” arrow on the mounting plate (D)
is pointing up when attaching the mounting plate (D) to
the junction box.
□
Connect the ground wire on the mounting
bracket (FF) to the house ground wire using a
wire connector (EE).
□
Route the black and white junction box wires
through a hole in the mounting plate (D).
□
Place the mounting plate (D) against the
junction box with the arrow pointing upward.
□
Insert the mounting bolt (DD) through the
center mounting plate (D) hole and thread it
into the center hole of the mounting bracket
(FF). Tighten the bolt (DD) securely.
□
Firmly pull on the mounting plate (D) to
verify it is securely attached to the mounting
bracket (FF).
NOTICE:
When attaching this light to an external, surface mount
junction box (1), caulk the rear of the mounting plate (D) before
mounting.
5
Making the electrical
connections
□
Insert the junction box wires into the side of
the terminal block. Tighten terminal block
screws and ground screw to secure the wires.
□
Insert the white wire from the junction box
into the terminal marked “N (White)”.
□
Insert the black wire from the junction box
into the terminal marked “L (Black)”.
Suitable for wet locations
Convient aux endroits humides
Idóneo para sitios húmedos
Wall mount only
Solo para montaje sobre pared
Installation murale seulement
Model:5936
Modèle:5936
Modelo:5936
Black
Noir
Negro
L
N
White
Blanc
Blanco
D
D
D
EE
DD
FF
1
