Defi ADVANCE ZD, Operation Manual

Page: 76 / 112

8 -3.・Display・setup・mode・(S2)
Set the rev bar display, indicator lighting, and warning buzzer, etc.
Caution
Set up while the vehicle is stopped.
※ Stop the special display by pressing L
SELECT
or R SET button once
when you set up if the graphic animation of special display is being played.
ZD・OPR
1. By pressing
L SELECT
and
R
SET buttons at the same time, the dis-
play shifts to display setup mode, and display setup menu is displayed. REV
BAR SCALE setup is highlighted at the start.
2. Choose the item to change by pressing
R SET
button. By pressing
L SELECT
button, the setting is changed.
3. After all the display settings are done, press
L SELECT
and
R SET
buttons at the same time to return to real mode.
Setting・items On・the・screen Default
REV BAR scale range setting REV BAR RANGE 3000RPM
REV BAR maximum scale value setting REV BAR MAX SCALE 8000RPM
Sequential indicator lighting pattern setting SEQ. IND. PATTERN SINGLE
Sequential indicator lighting step setting SEQ. IND. STEP 200RPM
Oil pressure warning limit setting OIL PRESS WARNING LIMIT 3000RPM
Warning buzzer setting DISPLAY WARNING BUZZER ON
Alarm setting ALARM OFF
Display number setting DISPLAY NO. No.1
8 -3-1.・REV・BAR・scale・range・setting・[REV・BAR・RANGE]
The scale range of rev bar (the difference between maximum and minimum
scale values) in digital display can be set.
Choose [REV BAR RANGE] by pressing
R SET
button. Select [3000RPM] or
[4000RPM] by pressing
L SELECT
button.
75