Defi ADVANCE ZD, Operation Manual

Page: 58 / 112

When pulling out the wires, press the lock firmly to unclip
the locks of connectors.
Do not install gauges, including this product, into the passenger side or
center of the dashboard. It doesn't meet vehicle safety standards.
Confirmation
Be sure to follow all instructions in this manual to ensure safe installation
and operation of the product.
When the negative (-) battery terminal is disconnected, equipment such
as clocks and audio components having internal memory may lose their
memory data. Follow the operation manual of each component to reset
data after installation of this product.
After installation is complete, return this operation manual, warranty card,
and the package along with the warranty to the customer .
Please confirm with the maintenance book that the car manufacturer issued
when installing and detaching genuine parts.
Before tapping wires, check the voltage of the existing wire. After tapping
the wire, check the voltage of the tapped wire again to confirm whether
you have tapped into the proper place.
If car navigation system or car television is installed in vehicle, gauges and
wires of this product need to be kept as far away as possible from the wiring
and installing positions of car navigation system or car television. Failure to
do so may result in interference of television display(VHF).
On no event will Nippon Seiki Co., Ltd. be liable to you for any damages or
losses of genuine parts for your vehicle while installing.
■ About・Installation・and・Operation・(for・customer・and・installation・personnel)
Warning
Please have this product installed by store professional or dealer where it
was purchased. Installation by the customer will void the warranty.
Do not disassemble or modify this product. Such actions will
not only void the warranty but also damage or destroy the
product.
Disassemble/
Modify
57