Defi ADVANCE ZD, Operation Manual

Page: 70 / 112

8 -2.・System・setup・mode・(S1)
Set the speed pulse, number of cylinders, tachometer response, and so on.
If ADVANCE tachometer is installed and number of cylinders and tachometer
response are already set, the settings are applied to ZD.
Caution
Make sure all the setting is done correctly. The product doesn’t operate properly.
Set up while the vehicle is stopped.
CU・OPR
(slide switch position：
L
)
1. Set the slide switch to L .
2. By pressing L button long,
the display shifts to system setup mode,
and SYSTEM SETUP menu is displayed. UNIT
setup is highlighted at the start.
3. Choose the item to change by pressing
M
or
R
button. By press-
ing the
L
button, the item to
setup is highlighted.
4. Change the setting properly by pressing
M
or
R
button.
By pressing
L
button, the setting is framed and set.
5. Return the slide switch to
U
or
M
after all the settings are
done.
Setting・items On・the・screen Default
Units setting UNIT km/h ・kPa・℃
Speed pulses setting SPEED PULSES 4
Number of cylinders setting ENGINE CYLINDERS 4
Tachometer response setting TACHO RESPONSE １：HIGH
Dimmer setting DIMMER Manual
Special display setting SPECIAL MODE ON
Warm-up setting WARM UP MODE OFF
Clock setting CLOCK 1:00(+B ON)
69