16
Placement of the Monitor
This monitor can be placed on a tabletop.
• You can place the monitor on a tabletop by using the retractable table stand on
the back of the monitor. When not in use, simply tuck the table stand away into the
back of the monitor until you hear a "click".
Placement of the Camera
This camera can be placed on a tabletop or hung on the wall above the
area being monitored.
• Place the camera within 15 feet of the area being monitored for best picture results.
• Do not place objects within 2 feet of the field of vision of the camera as the night vision will not
activate correctly if objects are too close.
Mounting the Camera on a Tabletop Safely
1. Place the camera on a tabletop no less than 3 feet away from area being monitored.
2. Feed the power cord down the back of the table or use wall clips (not included) to secure the
cord away so children cannot reach it.
3. Plug in the power cord, check the monitor to ensure that you are getting a clear view of the
area you are monitoring and there are no obstructions.
Mounting the Camera on a Wall Safely
Before drilling the holes, it is important to check the reception and camera positioning in the intended
location on the wall.
1. Pre-drill two holes in the wall using a 3/16”, 4.8mm drill bit.
2. Insert wall anchors (not included) into each hole and tap gently with a hammer until the anchor
is flush with the wall.
3. Insert a screw (not included) into each wall anchor and tighten until the screws only stick out
about a 1/2 inch.
4. Plug the power cord into the power input of the camera.
5. Locate the wall mounting holes on the bottom of the camera base.
6. Slide the holes over the screws sticking out of the wall.
7. Confirm that the camera is secure, if it is loose you may have to tighten the screws more.
8. Use wall clips (not included) to secure the cord to prevent tripping and so children cannot reach it.
9. Connect the other end of the adapter into an available wall outlet.
OPERATION
