25
Monitor
•
Control
•
Surveillance
8
Monitor
•
Control
•
Surveillance
Bypassing Zone
The system must be disarm,
Press [*] [4] follow by [master code]
The
BYPASS LIGHT
will on
Enter the number of the zone to by passed.
Press [#] to save & exit programming menu.
(The Led at zone that is bypass will
Always Flashing
)
To Unbypass Zone
The system must be disarm,
Press [*] [4] follow by [master code]
The
BYPASS LED
will on
Enter the number of the zone to unbypass.
Press [#] to save & exit programming menu.
(The Led at zone that is unbypass will
Stop Flashing
)
To Set The System Time
The system must be disarm,
Press [*] [1] follow by [master code]
Press [30]
Enter the
Ɵ
me [HHMM]
Press [#] to save & exit Programming menu.
To Set The System Date
The system must be disarm,
Press [*] [1] follow by [master code]
Press [31]
Enter the date [DDMM]
Press [#] to save & exit programming menu.
To Set The System Year
The system must be disarm,
Press [*] [1] follow by [master code]
Press [32]
Enter the Year [YYYY]
Press [#] to save & exit Programming menu.
Figure 10.3
• Then click back to the Reboot message web page (
fi
gure 10.1), click the link (h
Ʃ
p://DEFENDER:8088/).
• Defender Smart Alarm Login page was successfully access (
fi
gure 3.0).
b. If user want to assign a sta
Ɵ
c IP address with an IP address is no assign by Router, example, refer to
fi
gure 10.3, 192.168.1.3 was assign by Router, if user want to use another IP address as sta
Ɵ
c,
192.168.1.10.
• Go to Network Con
fi
gura
Ɵ
on (
fi
gure 10.0), un-
Ɵ
ck the ENABLE DHCP and change the IP Address to
192.168.1.10 and click the Save Con
fi
g bu
Ʃ
on.
• Reboot message will shown (
fi
gure 10.1). PS: Exit (close) the browser without click the link
(h
Ʃ
p://DEFENDER:8088/).
• Login to Router’s con
fi
gura
Ɵ
on, select DSA Mac address, change the IP address to 192.168.1.10, and
change the status to sta
Ɵ
c. Then click save.
• At computer, open Command Prompt (start->run->key in cmd)
Figure 10.2 Router Con
fi
gura
Ɵ
on
Interface
DHCP
DHCP Server
DHCP Table
DNS
Quick
Start
Interface
Setup
Advanced
Setup
Access
Management
Maintenance
Status
Help
Internet
LAN
Wireless
Dynamic Route :
Multicast :
IGMP Snoop :
RIP2-B
None
Disabled
Direction :
Disabled
Enabled
DHCP :
Disabled
Relay
Enabled
Starting IP Address:
IP Pool Count:
Lease Time :
seconds (0 sets to default value of 259200)
Hostname
IP Address
MAC Address
Status
Expire Time
192.168.1.2
00:E0:4C:77:36:54
Auto
2days, 21:57:40
2days, 22:27:9
Auto
00:04:A3:00:90:58
192.168.1.3
oem-adc4936ff0a
DNS Relay :
Primary DNS Sever :
Secondary DNS Server :
Use Auto Discovered DNS Server Only
N/A
N/A
Hostname
IP Address
MAC Address
Status
Expire Time
Manual Config
192.168.1.3
00:E0:4C:77:36:54
N/A
2days, 21:56:18
Auto
00:04:A3:00:90:58
192.168.1.2
oem-adc4936ff0a
