Defender 3.0 Voice Plus, User Manual, Page: 16 / 17

15
Monitor • Control • Surveillance
18
Monitor • Control • Surveillance
CMS Account Number
- The panel will communicate with Alarm Receiving Center using the account number
CMS Phone Number - The panel can set 2 phone number as primary and secondary. The primary number is the
number that system dialled fi rst (If programmed the secondary telephone number as a backup number for the primary
number)
Change Installer Code
- the default installer code is 1397. To change the installer code, the new installer code must
to key in 2 me.
Reset User Code - The panel will delete all the user code. Master code will change to default password, that is ‘1234’
Technical Data
System Time - The op on allow you to set the system me.
System Date - The op on allow you to set the system date.
System Year - The op on allow you to set the system year.
Auto Arm Par on - The system will auto arm the select par on.
Auto Disarm Par on - The System will auto disarm the select par on.
Night Mode Time - The op on allow you to set the night mode me.
Control Timer On - Home automa on on according to user se ng me.
Control Timer O ff - Home automa on o ff according to user se ng me.
Auto O ff Timer - Home automa on will auto turn o ff a er exceed user se ng me.
Technical Data
HOME AUTOMATION TIMER
Enter Programming Menu,
[ * ] [ 1 ] [ Mater code ] [ Address ] [ Time ]
Programming
CMS Account Number 1
CMS Account Number 2
CMS Phone Number 1
CMS Phone Number 2
Change Installer Code
Reset user Code
Reset panel
Address
70
71
72
73
76
98
99
-
-
1397
-
-
0000
0000
Default Value
System
System Time
System Date
System Year
Auto Arm Par
on 1
Auto Disarm Par on 1
Auto Arm Par on 2
Auto Disarm Par on 2
Night Mode begin me
Night Mode end me
Control Timer 1 on
Control Timer 2 on
Control Timer 1 o
ff
Control Timer 2 o ff
Auto O ff mer
Address
30
31
32
33
34
35
36
37
38
43 Minute
42
41
40
39
HHMM
HHMM
HHMM
HHMM
HHMM
HHMM
HHMM
HHMM
HHMM
HHMM
YYYY
DDMM
HHMM
Format
A device that allow user to check the home status and control the home device func onality though a
webpage.
MAC Address - 00:04:A3:00:90:58
IP Address - 169.254.1.1
Gateway - 169.254.1.1
Subnet Mask - 255.255.0.0
Primary DNS - 169.254.1.1
Secondary DNS - 0.0.0.0
Port - 8088
2.0 Communication between DSA and home user Router.
a. Home user Router will automa cally assign a Dynamic IP address to DSA ( fi gure 2.0). Example: TP-LINK
ROUTER (TD-W8901G) with DSAS
Figure 1.0 Connec Ɵ on between DSA and Router
Figure 2.0: IP address’s DSA assign by TP-link router as 192.168.1.3
DHCP Enable
Interface
DHCP Server
DHCP Table
DNS
Quick
Start Interface
Setup
Advanced
Setup
Access
Management
Maintenance Status Help
Internet LAN Wireless
DHCP :
Disabled Relay Enabled
Starting IP Address:
IP Pool Count:
Lease Time :
seconds (0 sets to default value of 259200)
Hostname IP Address MAC Address Status Expire Time
192.168.1.2 00:E0:4C:77:36:54 Auto 2days, 23:29:56
2days, 23:59:25 Auto 00:04:A3:00:90:58 192.168.1.3
oem-adc4936ff0a
DNS Relay :
Primary DNS Sever :
Secondary DNS Server :
Use Auto Discovered DNS Server Only
N/A
N/A
Assign by router
EEWS Mac Address
Defender Smart Alarm (DSA)
[default]