SuperDVR & TD Series Cards
User Manual
7
IE Client
63
Fig 7.12 Computer System Reboot Setup
As the windows system may become unstable after a couple of days to
continue operating. It may cause SuperDVR system unstable. The software
supports auto-reboot. Select
and set the interval by day, which
will guide the system to reboot automatically according to the setups.
3. Alarm setup
The Alarm setup configuration is show as below:
Fig 7.13 Alarm triggering configuration
Relative Explanations:
1. Buzzer
Users can select whether to open the computer buzzer if the alarms have
been triggered also select how long the buzzer rings
2. Full screen alarm
Users can select whether channel will be full screen when alarm triggered.
Set the full screen hold time here
3. Pre-alarm record
Users can select whether to enable alarm pre-record and also pre-record time
This option is for users to see remote live view.
4. Disk storage alarm
If the Partition free space is less than the set percent, it will stop recording or
recycling, but give alarm tips according to the settings
5. Motion holding time
The continuous recording time after motion stopped
6. Sensor holding time
The continuous recording time after sensor stopped
