SuperDVR & TD Series Cards
User Manual
4
System Setup
39
When a channel alarm, the camera icon will flash yellow alarm signal. Select
‘
Auto Show
’, in case of accident alarming, an alarming screen will pop out
automatically and you can know about the alarming position rapidly. Click the
camera head by right key to show the screen on the spot.
NOTICE
1. The map tree currently supports three levels and it is invalid for addition exceeding
three levels.
2. For loading of a picture, when any side of length and width of the picture exceeds size
of picture frame, it will be enlarged and shortened proportionally and standard size of
picture frame is 833*678.
3. On this interface, click camera by right key to display the spot and the 3316 card does
not support this function temporarily.
4. If ‘
Auto Show
’ is set in case that E-map pops up by automatic alarming, the E-map
interface set with ‘
Holding Time
’ without any operation and alarm will be close
automatically. ‘
Auto Show
’ is invalid when the E-map is opened manually.
5. The map in the E-map is the default demonstration map, and the user can invite an
engineering merchant to make the practical map or draw a map by their own according
to their actual needs, then scan and save it in the computer to picture.
4.7 P.T.Z Control Configuration
Click
and enter the following area:
Figure4-17 PTZ Configuration Panel
4.7.1 Protocol Setup
Users can select different protocols, serial port number for P.T.Z devices.
