DEFA SmartCharge 701515, Technical Manual

Page: 13 / 76

13 English
Product warnings
1. This product is not intended for use by
children or people with reduced physical,
sensory or mental capabilities, unless under
the supervision of a person responsible for
their safety.
2. The mains’ power supply cord cannot be
replaced. If the cord is damaged, discontinue
usage.
3. This charger is designed for use only with
LEAD/ACID type (both open and closed)
batteries including AGM, GEL and Calcuim
types; and for battery sizes 12V/4–120Ah.
The charger should not be used for other
battery types.
4. Batteries can emit explosive gases during
normal charging. Avoid sparks in the
immediate area and always provide proper
ventilation during charging.
5. Connect the chargers plus clamp to the plus
terminal on the battery. Connect the minus
clamp to the chassis of the vehicle away from
petrol pipes. Connect then to the wall socket.
6. After charging, power-off the charger and
disconnect from the mains’ power supply.
The minus and plus terminals can then be
disconnected.
7. This charger includes high-strength magnets
and should not be placed in close proximity to
magnetic storage devices such as computer
hard drives and tape media.