DEFA SmartCharge 701515, Technical Manual

Page: 9 / 76

9 English
Post Analysis
The charger analyses the battery again after the
charging phase. If the charger detects an error in
the battery, the warning triangle will flash. Post
analysis can detect batteries with a short circuit in
individual cells. This cannot be detected in the pre
analysis. If the battery voltage drops below 12.6V
within 2min, the charger will go into error mode.
The charging sequence will be stopped.
Long-term charging
After the battery is fully charged, the charger will go
in to Sleep Mode. This is indicated by all battery
LEDs slowly pulsating. This mode has a very low
power consumption.
After a week in Sleep Mode, the charger will
wake up and begin a new charging cycle.
The charger will also wake up and start a
charging cycle if battery voltage drops below 12.6V.