Introduction
Page 7 of 36
057-300 ISSUE: 1.1
.
Term
Description
PCAN-USB
USB to CAN converter interface for Windows™ PCs. See section entitled
Maintenance, Spares, Repair and Servicing
elsewhere in this document for part
number details.
PGN
Parameter Group Number
A CAN address for a set of parameters that relate to the same topic and share
the same transmission rate.
PLC
Programmable Logic Controller
A programmable digital device used to create logic for a specific purpose.
SCR
Selective Catalytic Reduction
A process that uses DEF with the aid of a catalyst to convert nitric oxide and
nitrogen dioxide into nitrogen and water to reduce engine exhaust emission.
SPN
Suspect Parameter Number
A part of DTC that indicates what the failure is, e.g. oil pressure, coolant
temperature, turbo pressure etc.
TSC1
Torque/Speed Control 1
A method of speed control of electronic engines. This is the speed control
method supported by the DSEE050 device.
1.3 BIBLIOGRAPHY
This document refers to and is referred by the following DSE publications which are obtained from the
DSE website: www. deepseaelectronics.com or by contacting DSE technical support: support@
deepseaelectronics.com.
1.3.1 INSTALLATION INSTRUCTIONS
Installation instructions are supplied with the product in the box and are intended as a ‘quick start’
guide only.
DSE Part
Description
053-242
DSEE050 Installation Instructions
1.3.2 MANUALS
Product manuals are obtained from the DSE website: www. deepseaelectronics.com or by contacting
DSE technical support: support@ deepseaelectronics.com.
DSE Part
Description
057-299
DSEE050 Configuration Suite PC Software Manual
1.3.3 TRAINING GUIDES
Training guides are provided as ‘hand-out’ sheets on specific subjects during training sessions and
contain specific information regarding to that subject.
DSE Part
Description
056-117
J1939 29-bit Identifier
