Specification
057-300 ISSUE: 1.1
Page 16 of 36
2.10.1 ENCLOSURE CLASSIFICATIONS
2.10.1.1 IP CLASSIFICATIONS
The modules specification under BS EN 60529 Degrees of protection provided by enclosures
IP67
(Front of module when module is installed into the control panel with the optional sealing gasket).
IP67
(front of module when module is installed into the control panel WITHOUT being sealed to the panel)
First Digit
Second Digit
Protection against contact and ingress of solid
objects
Protection against ingress of water
0
No protection
0
No protection
1
Protected against ingress solid objects with a
diameter of more than 50 mm. No protection
against deliberate access, e.g. with a hand, but
large surfaces of the body are prevented from
approach.
1
Protection against dripping water falling vertically. No harmful
effect must be produced (vertically falling drops).
2
Protected against penetration by solid objects with
a diameter of more than 12 mm. Fingers or similar
objects prevented from approach.
2
Protection against dripping water falling vertically. There must
be no harmful effect when the equipment (enclosure) is tilted
at an angle up to 15° from its normal position (drops falling at
an angle).
3
Protected against ingress of solid objects with a
diameter of more than 2.5 mm. Tools, wires etc.
with a thickness of more than 2.5 mm are
prevented from approach.
3
Protection against water falling at any angle up to 60° from
the vertical. There must be no harmful effect (spray water).
4
Protected against ingress of solid objects with a
diameter of more than 1 mm. Tools, wires etc.
with a thickness of more than 1 mm are prevented
from approach.
4
Protection against water splashed against the equipment
(enclosure) from any direction. There must be no harmful
effect (splashing water).
5
Protected against harmful dust deposits. Ingress
of dust is not totally prevented but the dust must
not enter in sufficient quantity to interface with
satisfactory operation of the equipment. Complete
protection against contact.
5
Protection against water projected from a nozzle against the
equipment (enclosure) from any direction. There must be no
harmful effect (water jet).
6
Protection against ingress of dust (dust tight).
Complete protection against contact.
6
Protection against heavy seas or powerful water jets. Water
must not enter the equipment (enclosure) in harmful
quantities (splashing over).
7
No ingress of water in harmful quantity when the enclosure is
immersed in water under defined conditions of pressure and
time (up to 1 m of submersion)
