248-624-7710 / dedoes.com
Alliance A7 Assembly Instruc�ons
P1615 RV.5 2022-05-20
Alliance A7 System Care and Maintenance Guidelines
To maintain the best performance from your Alliance A7 paint mixing system please follow these helpful guidelines:
Cleanliness:
All units should be kept clean and free of dust and dirt. A vacuum works well for this purpose.
Lubrica�on:
Periodic lubrica�on to the three pulley shoulder bolts under each mixing shelf will help maintain quiet opera�on of the machine. A
small drop of lubricant under the head of the shoulder bolt should be all that is required. Make sure the shoulder bolt is free of dirt
before lubrica�ng.
We suggest using Spray Gun Lube or a lubricant that your paint manufacturer recommends.
Note:
In extremely dirty environments it may be necessary to remove the shoulder bolt from the pulley assembly and clean off the dirt
before lubrica�ng.
Belts:
The belts are made of steel reinforced polyurethane. In most cases the belts will not need to be adjusted. The belts do not need
to be �ght to operate correctly. It is OK and correct if the belt has slack along the back side of the mixing unit.
Note:
Excessive belt tension will cause noise or problems with the machine opera�on. If the belt has no slack along the backside or
appears too �ght, please contact Dedoes Customer Service at 248-624-7710 for instruc�ons on how to properly adjust the belt.
Cau�on:
Do not use silicone based lubricants.
Shoulder Bolt
Pulley
Washer
Locknut
Lubricate here
