3. Press the arrows to show the measured values one by one (refer to
the table below).
4. Exit the measured values menu by waiting for 10 seconds.
9.3.2
List of operating parameters
Parameter
Description
Unit
Water temperature in the domestic hot water tank
°C
Measured room temperature
°C
Evaporator temperature
°C
Intake temperature
°C
Discharge temperature
°C
Water temperature difference between the set point and the
restart
°C
EEV
Electronic pressure release valve position
UE : xx
UE : Operating indication:
for the compressor
for the immersion heater
for the compressor and immersion heater combined
xx : Electrical power consumption
A
X
Operating mode
1 = ECONOMY MODE = Economic mode
2 = HYBRID MODE = Hybrid mode
4 = OPT.BACKUP = Peak rate/off-peak rate optimisation
mode
8 = OFF mode
:
X
Fan speed:
F0 = OFF
F1 = Slow
F2 = Moderate
F3 = Fast
DI : XX
Anti-legionella function:
DI : -- : Function not active,
DI : 65 : Anti-legionella temperature of 65°C,
DI : 70 : Anti-legionella temperature of 70°C
P1
Total energy consumption for the thermodynamic water heater kWh
P2
Energy consumption for the heat pump over the last 24 hours Wh
P3
Energy consumption for the immersion heater over the last 24
hours
Wh
t1
Total runtime for the thermodynamic water heater
hours
t2
Runtime for the heat pump
hours
t3
Runtime for the immersion heater
hours
Last error code
Second error code
Third error code
YY-MM-DD
Software version
Fig.30
MW
-1
0
0
0
7
4
3
-1
9 Settings
44
ETWH
7629886 - v07 - 20072020
