6 Installation
6.1
General
Important
Pursuant to Article L. 113-3 of the French Consumer Code, this
equipment must be installed by a certified operator whenever a
refrigerant connection is necessary (the case with split systems,
even when fitted with a quick coupling device).
6.2
Preparation
6.2.1
Installation of the thermodynamic water heater
1. Separate the water heater from its pallet.
2. Level the water heater, fitting metal blocks under the water heater feet
if necessary.
Caution
Do not place the blocks on the external sides of the water heater.
Caution
To allow condensates to drain easily from the appliance, install it
on a horizontal floor.
If this is not possible, the drain opening must be located at the
lowest point.
The angle of incline must not exceed 2°.
6.3
Hydraulic connections
Caution
Before making the hydraulic connections, it is essential to flush
the domestic hot water circuits.
If flushing has to be done using an aggressive product, neutralise
the rinsing water before disposing of it in the waste water network.
Important
Using hoses which are too short or too rigid encourages the
transmission of vibrations and the production of noises.
Fig.14
Installation
MW
-1
0
0
0
2
5
0
-1
6 Installation
7629886 - v07 - 20072020
ETWH
29
