15
A forgotten dish can be added any time before the detergent cup opens.
Add forgotten dishes.
Close the door
After the spray arms stop working, you can open the door
completely.
2
3
Open the door a little .
1
4
5
The dishwasher will start running again.
It is dangerous to open the door mid-cycle,
as hot steam may scald you.
When the wo rking cycle has fi nished, the buzzer of the dishwasher will soun d for 8 seconds, then stop. Turn off
t he appliance usi ng the O N/O FF button, shut off the wa ter supp ly and open the door of the di shw ashe r.
Wait for a few minutes bef ore unlo ading th e dishwasher to avoi d ha ndlin g the dishes and utensils while th ey
are still hot and m ore suscept ible to break . They wi ll also dry be tter.
Open the door carefully.
Hot dishes are sensitive to
minutes before removing from
the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.
s hocks. The dishes should cool down for around 15
Unloading the dishwasher
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto
the dishes in the lower one.
It is normal for the dishw asher to be wet insid e.
Switching Off the Dishwasher
Th e pro gram light is on but i s not blin kin g, only in this case has the programme ended.
1.Switch off the dishwasher by p ressing the O N/OFF button.
2.Turn off the w ater tap!
If you open the door
, the machine will pause. The colon in the
display will stop blinking and the buz zer will
every minute unless you clos e the door .
After you close the door ,the machine will k eep on working after 10 seconds.
dur ing a w ash cycle
sound
Prem ise:
1 A ru nning cycle can on ly be chan ged if it has on ly been running for a short ti me. Othe rwise, the detergen t ma y
have already bee n released, an d the appliance may have already drai ned t he w ash w ater. If this is the case,
the detergent disp enser mu st be refil led (see t he section entitled F
).
2 Press the sta rt/pause t o sto p the washing, pre ss the Program but ton
,
the machine will b e in standby state, then you can change the program to t he desired cycle setting
(see the section entitled " S tarti ng a washing program
).
more t han 3 seconds
"
illing the dete regent dispenser