14
9 / LOADING THE RINSING PRODUCT
EN
Adjustment lever
Fig. 07
A
B
C
Important :
Use a special dishwasher rinse aid product to
improve drying and prevent filming.
Unscrew and remove the compartment cap.
Before starting up the dishwasher, fill the
compartment with rinse aid up to the
adjustment lever.
Firmly screw the cap back on.
The default adjustment is 2.
If drying is inefficient or marks are leftest
glasses (after having run several cycles),
you may increase the dosage by setting the
adjustment to 3 ;
Tip :
Setting the adjustment to 1 reduces rinse aid
consumption and may be sufficient for your
needs.
• Determining the rinse aid product
level :
The screen shows you a fill level indicator.
C
A
B
full
almost
full
empty
(flashing)
Tip :
If using combined (4-in-1) pellets, this product is not required. You can deactivate the rinse
product level detector (see page 11).
Important :
If the rinse aid overflows onto the door on refilling, sponge off the excess to prevent foam
from forming.
•
Loading the rinsing product
. (Fig. 07)
1
2 3
1
2 3
