-------------------------------------------------------------- or --------------------------------------------------------------
45
45
7
2 / DESCRIPTION OF YOUR APPLIANCE
EN
• PRESENTATION OF CONTROL PANEL
(Some models only)
On/ Off :
Press this button to start up the dishwasher.
Selection buttons :
For choosing the programme (see page 20).
For change the settings (see page 10-11).
Set, Delayed end
:
Changing the settings (see page 10-11).
Adjusting the programme end time
(see page 21).
START :
Press this button to start up the programme.
In case of error, hold down this button for a
few seconds to cancel a selection or a
programme that is already running.
Programme selected indicator :
High brightness : this indicates the
programme has been selected.
Display :
This shows the current time, the programme
end time, the remaining programme time and
the setting adjustments.
Pilot lights :
Salt :
On: indicates the salt compartment is empty or
almost empty.
Rinse aid :
On: indicates the rinse aid compartment is
empty or almost empty.
Multi-function products :
On: this indicates the “4/1” function is
activated (see page 11). The programmes are
automatically adapted to multi-function
products.
G
E
F
A
B
C
D
Observations :
A short beep confirms the button has been pressed (except the “On/Off” button).
To aid the loading process, the dishwasher interior light comes on when you open the door and switches
off when you push it up or close it, regardless of the position of the “On/Off” button (Some models only).
For
power saving purposes
, this dishwasher automatically goes onto
standby
if it has not been
activated for a certain period (except in time delay mode).
The display becomes intermittent.
The tub’s light switches off automatically after 5 minutes of lightning (Some models only).
To exit standby mode, simply press the “
START
” button. The dishwasher will then go into its
previous status.
G
Fig. 02a
A
F
C
D
B
E
